DIX BAYCO 2" Pressure Relief Valve 18 PSI Male NPT

Designed specifically for use on tractor mounted air blowers. The 2181 air relief valves have a temperature compensated pressure relief setting to accommodate the high temperatures and dynamic air produced by the blower. If a system blockage were to occur, the valves are designed to vent to atmosphere once the valve pressure setting is achieved.

FEATURES:

• Aluminum anodized hard coat
• White food grade silicone poppet and diaphragm
• High relieving capacity varies between 800 SCFM and 1700 SCFM depending upon the chosen set pressure.
• Installed cup seal deters tampering
• Anodized aluminum body reduces thread galling

NOTES:

• The popular pressure setting for truck mounted blowers is 20 PSI. Valves are available for other applications with temperature compensated pressure settings of between 3 PSI and 24 PSI. Customer should request set pressure at time of order.
• The 2182 valve will relieve at the ordered set pressure at a temperature of 400°F / 204°C. At room temperature 73°F / 22°C the 2182 valve will relieve approximately 4 PSI higher than the ordered set pressure.
• The product label shows the set relief pressure at the blow operating temperature, plus the relief pressure at 73°F / 22°C (for testing purposes). Depending on the blower type, amount of vibration and operating temperature a difference of observable set pressure may occur.

SPECIFICATIONS:

WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.