DIX BAYCO 2" Pressure Relief Valve 20 PSI Male NPT

Designed specifically for use on tractor mounted air blowers. The 2182 air relief valves have a temperature compensated pressure relief setting to accommodate the high temperatures and dynamic air produced by the blower. If a system blockage were to occur, the valves are designed to vent to atmosphere once the valve pressure setting is achieved.

FEATURES:

• Aluminum anodized hard coat
• White food grade silicone poppet and diaphragm
• High relieving capacity varies between 800 SCFM and 1700 SCFM depending upon the chosen set pressure.
• Installed cup seal deters tampering
• Anodized aluminum body reduces thread galling
• The 2182 valve will relieve at the ordered set pressure at a temperature of 400°F / 204°C. At room temperature 73°F / 22°C the 2182 valve will relieve approximately 4 PSI higher than the ordered set pressure.
• The product label shows the set relief pressure at the blow operating temperature, plus the relief pressure at 73°F / 22°C (for testing purposes). Depending on the blower type, amount of vibration and operating temperature a difference of observable set pressure may occur.
• Example: 2182/18 is set to relieve at 18 PSI while at operating temperature. This same valve will test at 22 PSI while at room temperature on a test bench. Both set points are listed on the label.